Test your circuit breaker

The residual current device (RCD) is the most critical component in your electrical panel and should be tested 1–2 times a year.

24/7 Emergency Service
We are ready 24/7
39 16 31 31

Fast response
Short response time

Quality
Proper craftsmanship

Sustainability
We take responsibility

The residual current circuit breaker protects against electric shock

In technical terms, the breaker is referred to as an HFI or HPFI relay (RCD). The Danish acronym stands for High-sensitivity (H), Pulsating (P), Fault (F), and Current (I).

As the name implies, the breaker protects against electric shock in the event of residual current. A residual current fault occurs when the amount of current entering an installation does not match the current flowing out.

If a fault occurs in a wire or cable connected to, for example, a washing machine, the breaker detects the fault current and disconnects the electrical installation. This eliminates the risk of electric shock.

It is therefore vital that the breaker functions properly, and you should test it 1–2 times per year.

Trustpilot

5 out of 5 stars

500+ reviews

HPFI breakers do not trip as easily during thunderstorms

A sudden power surge in the electrical grid caused by a nearby lightning strike can trip the electrical installation, even when there is no actual residual current fault.

For instance, many people have returned from vacation after a thunderstorm to find their refrigerator or freezer disconnected.

This can be difficult to prevent completely. One effective solution is to replace an older HFI breaker with a newer HPFI breaker, which does not trip as easily during thunderstorms. The replacement must be carried out by an authorized electrical contractor.

By law, HPFI breakers must be installed in all new buildings constructed in or after 1993. You can also ask a neighbor to check whether the breaker has tripped after a thunderstorm while you are away.

Important: The breaker does not protect against lightning damage. The most effective protection against lightning damage is to disconnect electrical appliances by unplugging them and turning off the power when lightning strikes nearby, or when you leave for vacation.

You can also have a lightning protection system or surge protector installed. PH-El & Sikring will be pleased to assist you with this.

Frequently asked questions about HFI and HPFI breakers

Learn how to test your breaker and when to contact an authorized electrical contractor.

Press the test button on the residual current device, which is usually marked with a “T”. The power should trip when you press the button.

If the power does not cut out, the residual current circuit breaker is not operating correctly. You should have it inspected by an authorized electrical contractor.

You should test your HFI or HPFI breaker 1–2 times per year.

No. It is illegal to replace or repair the residual current circuit breaker yourself. The work must be performed by an authorized electrical contractor.

No. An HFI or HPFI breaker does not protect against lightning damage. You can obtain additional protection by installing a lightning rod system or surge protection device.

PH-El & Sikring is your local electrical contractor

At PH-El & Sikring, we specialize in the repair and installation of HPFI circuit breakers. We offer prompt emergency services and expert guidance for residential and commercial clients alike.

If you are unsure whether your residual current device is functioning properly or complies with regulatory requirements, you are always welcome to contact PH-El & Sikring.

Døgnvagt 24/7

Vore servicebiler kører dagligt overalt på Sjælland – og vor døgnvagt kan tilkaldes 24 timer i døgnet – alle dage – hele året rundt.

Et udkald koster kr. 4.300 inkl. moms, som betales kontant inden arbejdet påbegyndes.